Frequently Asked Questions for New Apple Watch Users
StressWatch has over 3 million users worldwide. We sincerely appreciate your trust and support.
During our product operations, we found that new Apple Watch users, due to their limited familiarity with the features and limitations of the Apple Watch, often mistake some of these inherent limitations for issues with StressWatch, leading to misunderstandings.
Here, we list some characteristics of the Apple Watch to help new users better understand both the Apple Watch and StressWatch.
Below are some facts about the Apple Watch:
1. The Apple Watch face does not refresh in real time
2. The stress monitoring on a newly purchased Apple Watch may be inaccurate
3. Explanation of HRV/real-time stress monitoring frequency
4. Any special mode will affect the connection between the iPhone and the Watch
5. Important notes for downloading apps on the Apple Watch
6. Remember to unlock the Watch
7. Do not enable Low Power Mode arbitrarily
1. The Apple Watch Face Does Not Refresh in Real Time
That’s correct. Except for a few special watch faces (such as time and compass), most official Apple watch faces as well as all third-party watch faces do not support real-time refreshing.
Real-time refreshing is very power-intensive, so Apple has imposed restrictions and does not allow third-party apps to refresh in real time (not even once every few minutes).
Typically, a refresh delay of 5 minutes to half an hour is normal; if your watch battery is low or if too many apps are running, the delay may be longer.
As developers, even with all settings correct, we can only request a refresh from watchOS for the watch face; the actual timing of the refresh is completely controlled by watchOS.
2. The Stress Monitoring on a Newly Purchased Apple Watch May Be Inaccurate
HRV is a highly individualized metric. For example, a reading of 30ms may be considered low for some people and high for others.
The calculation for real-time stress is similar.
Therefore, when you first get the watch and there is no historical data, it is impossible to make an extremely accurate assessment. In some cases, the deviation might be significant.
Please wear your watch patiently for at least two weeks.
3. Explanation of HRV and Real-Time Stress Monitoring Frequency
The HRV monitoring frequency is entirely determined by the Apple Watch, and no third-party app can adjust this frequency. (Currently, the only way to increase the Apple Watch's HRV monitoring frequency is by enabling Afib; any third-party app claiming to adjust the HRV monitoring frequency is a scam.)
Real-time stress is based on our self-developed algorithm, primarily relying on heart rate data, and it updates every 6 minutes.
However, both HRV and real-time stress data are only valuable when the user is at rest (just as in a hospital they wouldn’t measure your pulse while you are running). Therefore, no data will be recorded in the following situations:
- When you are moving frequently or when your wrist is moving too much, the measurement may be inaccurate. We proactively remove such data (on the iPhone’s chart, the removed data will be marked as "frequent movement").
- When the watch’s heart rate detection is malfunctioning (please check in Apple Health under Browse > Heart to see if there is recent heart rate data).
- When the watch is in Low Power Mode.
- During an active workout session.
- When you are moving at high speed (running, cycling, riding in a vehicle, etc.).
- When the watch is not unlocked.
- When the watch is not worn securely.
4. Any Special Mode Will Affect the Connection Between the iPhone and the Watch
Special modes such as Sleep, Focus, Theater, and Low Power Mode will affect the connection. In these modes:
- The Apple Watch will stop downloading apps.
- Communication between the Watch and the iPhone will be weakened or interrupted.
If you encounter any connection or download issues, first ensure that no special mode is enabled.
5. Important Notes for Downloading Apps on the Apple Watch
Please ensure your watchOS version is compatible; StressWatch can be installed and used normally on watchOS 9 and above.
If your Watch app does not install automatically, open the built-in Watch app on your iPhone, scroll to the bottom of the main page to find the StressWatch app, and tap to download it.
Please note:
- Both your iPhone and Watch should be connected to Wi-Fi.
- The watch screen must be unlocked.
- Do not enable any special modes, including (but not limited to) Sleep, Do Not Disturb, Theater, Focus, etc.
- The progress bar on the iOS Watch app may not be accurate—once you tap download, just let it run.
- Our Watch app has many functions and a larger file size, so installation may be slightly slower than a typical Watch app.
- The stability of the connection between the Apple Watch and the iPhone can affect the installation; stability may vary based on circumstances.
- If the installation process is interrupted (due to network changes or enabling a special mode), the app will restart the download.
- If your Watch app is auto-updating and the update is interrupted, there is a chance the Watch app may disappear.
6. Remember to Unlock the Watch
If the Watch is not unlocked, almost no data will be monitored, and third-party apps will not be downloaded.
7. Do Not Enable Low Power Mode Arbitrarily
If the Apple Watch is in Low Power Mode, it will only function as a timepiece and all other health monitoring functions will be disabled.